Stereo Microphone Cable / Aerial Microphone Cable

#24AWG Stereo Microphone Cable

W3106

Stereo microphone cable comprised of larger and mechanically stronger cores for those who need stereo wiring at stage recording etc. to get rid of tangling problems. OD of each channel is 4.8mm (0.189") to relieve any anxiety about mechanical strength of separated cores connected to each XLR 3P audio connectors when compared with regular 2-core snake cable. This design of OFC conductor and low capacitance as regular size microphone cable assures the same reliable sound quality as MOGAMI #2549 mic cable level.
High Tension Aerial Microphone Cable

W3177 (Monaural)

W3178 (Stereo)


These cables are designed for suspension microphones reinforced by one stainless steel wire rope of 830 N (187 pounds) breakable weight for monaural type (Part No. W3177) and two same size ropes for stereo type (Part No. W3178). Although the sound quality is compromised a little (especially at high frequency range), they are all designed with quad (shielded four conductor) configuration for wider applications (to provide stronger electromagnetic noise cancellation).

SPECIFICATIONS
Configuration
Part No. W3106 W3177 W3178
No. of Cores 2 1 2
No. of Conductor 2 4 4
Conductor Details 20/0.12 OFC 20/0.12 OFC 30/0.08 OFC
Size(mm²) 0.226mm² (#24AWG) 0.226mm² (#24AWG) 0.15mm² (#26AWG)
Insulation Ov. Dia.(mm) 1.6Ø (0.063") 1.6Ø (0.063") 0.9Ø (0.0354")
Material XLPE (Cross-Linked Polyethylene) LNXLPE(Low Noize Cross-Linked Polyethylene)
Colors Blue / Clear Blue / White (Quad)
Reinforcement Material - Stainless Steel Wire Rope
Details 7/7/0.11
Numbers of Rope 1 2
Breakable Weight 830 N (187pound) 1,660 N (374pound)
Monofilament Ov. Dia.(mm) 1.1Ø (0.043") - -
Material XLPE (Cross-Linked Polyethylene)
Filler Thread - Cotton Aramid
Binder Thickness - 0.025mm (0.00098") -
Material Paper Tape
Served Shield Approx. 80/0.12A Approx. 115/0.12A Approx. 68/0.10A
Core Jacket Ov. Dia.(mm) - - 2.8ì (0.110")
Material PVC
Colors Red / White
Filler Thread - - Polypropylene
Binder Thickness - - 0.025mm (0.00098")
Material Paper Tape
Ov. Jacket Ov. Dia.(mm) 2×4.8ì (2×0.189") 6.8ì (0.268") 7.4ì (0.291")
Material PVC PVC+Polyurethane Compound
Color Black
Roll Sizes 50m (164 Ft)
100m (328Ft)
200m (656Ft)		 200m (656Ft) 200m (656Ft)
Weight 5.7kg/100m 12.2kg/200m 13.3kg/200m

ELECTRICAL & MECHANICAL CHARACTERISTICS
Part No. W3106 W3177 W3178
DC Resistance at 20°C Inner Cond. 0.083W/m(0.0253W/Ft) 0.090W/m(0.027W/Ft) 0.13W/m(0.0397W/Ft)
Shield 0.021W/m(0.0064W/Ft) 0.015W/m(0.0046W/Ft) 0.035W/m(0.011W/Ft)
Capacitance at 1kHz, 20°C
(Partial C. Value)
See below figure*		 K0 (Shield-Conductor) 77pF/m(23.5pF/Ft) 108pF/m(32.9pF/Ft) 83pF/m(25.3pF/Ft)
K1 (between neighbour conductors) 10pF/m(3.1pF/Ft) 8pF/m(2.44pF/Ft) 18pF/m(5.49pF/Ft)
K2 - 3pF/m(2.44pF/Ft) 3pF/m(2.44pF/Ft)
Balanced Quad Connection Cond-Cond - 107pF/m(32.6pF/Ft) 160pF/m(48.8pF/Ft)
Cond-Shield - 190pF/m(58.0pF/Ft) 222pF/m(67.7pF/Ft)
Inductance 0.9µH/m(0.27µH/Ft) 0.5µH/m(0.15µH/Ft) 0.2µH/m(0.061µH/Ft)
Electrostatic Noise** 5mV Max. 20mV Max. 5mV Max.
Electromagnetic Noise at 10kHz** 0.5mV Max. 0.013mV Max. 0.06mV Max.
Microphonics 10mV Max. 5mV Max. 10mV Max.
Voltage Breakdown Must withstand at DC 500V/15sec.
Insulation Resistance 100000 MW × m Min. at DC 125V, 20°C
Flex Life** 100,000 cycles 36,100 cycles 59,000 cycles
Tensile Strength 382N (per pair) Over 980N
Emigration Non-emigrant to ABS resin
Applicable Temperature -20°C~ +70°C(-4°F~ +158°F)
Standard UL 20002 AWM 30V 60°C VW-1 - -
** Using standard testing methods of Mogami Wire & Cable Corp. * Patial Capacitance
Broadcast Multimedia Division   |   Optical Systems Division   |   Cable & Connectors Division   |   MXL   |   About Marshall Electronics